GSK GSK980TDc, Руководство пользователя

Страница: 110 / 470

GSK980TDc Turning CNC System User Manual
92
Ⅰ
Progra
mming
Example: Fig. 3-24, rod Φ 125×112
Fig. 3-24
Program: O0003;
G00 X130 Z5 M3 S1;
G94 X0 Z0 F200 End face cutting
X120 Z-110 F300;
G00 X120 Z0
G94 X108 Z-30 R-10
X96 R-20
X84 R-30
X72 R-40
X60 R-50;
M30;
3.19.3 Caution of fixed cycle commands
1) After X(U) , Z(W) , R are executed in the canned cycle command, their command values are
value if X(U) , Z(W) ,R are not redefined by executing a new canned cycle commands. The command
values of X(U) ,Z(W) ,R are cleared if non-modal G command(00 Group) except for G04 or G00,
G01, G02, G03, G32 is executed.
2) In MDI mode, the previous canned cycle can be executed by pressing the cycle start key after
the canned cycle is completed.
3) One cycle cannot be executed repetitively in G90 ～ G94 when the next block of G90 ～ G94 is
M, S, T command; the previous cycle is executed repetitively in G90
～
G94 when the next block is
ended( EOB;).
Example: …
N010 G90 X20.0 Z10.0 F400;
N011 ; (execute G90 one time repetitively)
…
4) Pause or single block is executed in G90, G94, the single block stops after the tool moves end
point of current path.
（ Outer cutting Φ 120 ）
（
C → B → A
，
cutting Φ 60
）