GSK GSK980TDc, Руководство пользователя

Страница: 178 / 470

GSK980TDc Turning CNC System User Manual
160
Ⅰ
Progra
mming
must cancel it before calling subprogram and then create it again in the subprogram.
z The system does not execute the tool nose radius compensation in G71, G72, G73, G74, G75,
G76 and cancel it temporarily.
z The system executes the tool nose radius compensation in G90, G94, it offsets one tool nose
radius for G41 or G42.
4.1.7 Application
Machine a workpiece in the front tool post coordinate system as Fig. 4-13. Tool number:
T0101, tool nose radius R=2, imaginary tool nose number T=3.
X
Z
R6
Fig. 4-13
For toolsetting in Offset Cancel mode, after toolsetting, Z axis offsets one tool nose radius
and its direction is relative to that of imaginary tool nose and toolsetting point, otherwise the
system excessively cuts tool nose radius when it starts to cut.
Set the tool nose radius R and imaginary tool nose direction in “
TOOL OFFSET&WEAR”
window as following:
Table 4-3
No. X Z R T
001 2.000 3
002 … … … …
… … … … …
007 … … … …
008 … … … …
Program:
G00 X100 Z50 M3 T0101 S600; (Position, start spindle, tool change and execute
tool compensation)
G42 G00 X0 Z3; (Set tool nose radius compensation)
G01 Z0 F300; (Start cutting)
X16;