GSK GSK980TDc, Руководство пользователя

Страница: 423 / 470

Chapter 3 Parameters
401
V
olume
Ⅲ
Connecti
o
n
0 0 7 ZC5 ZC4 ZCY ZCZ ZCX
ZCX, ZCZ, ZCY, ZC4, ZC5 =0: Separate DEC and zero signals needed during machine zero
return
=1: DEC and zero signals together by a proximity switch during
machine zero return
Note: This parameter should be set to 1 if a proximity switch is taken as both deceleration and zero signal.
0 1 1 *** *** NORF ZNIK *** ***
Bit3 1: Manual machine zero return inactivity
0: Manual machine zero return active
Bit2 1: Stop at zero by pressing direction key once in zero return with direction key locked;
0: Direction key should be held on in zero return with direction key unlocked.
0 1 2 APRS *** *** ISOT
Bit7 1: ABSOLUTE automatically set after reference return, the coordinate set by parameter
No.049 and No.050;
0: ABSOLUTE not automatically set after reference return
Bit 6 1: Prior to machine zero return after power-on or E-stop, manual rapid traverse active
0: Prior to machine zero return after power-on or E-stop, manual rapid traverse inactive
0 1 4 ZRS5 ZRS4 ZRSY ZRSZ ZRSX
Bit4, Bit3, Bit2, Bit1, Bit0 1: 5
th
, 4
th
, Y, Z, X has machine zero, the system detects DEC signal and
zero signal in executing machine zero return.
0: 5
th
, 4
th
, Y, Z, X has machine zero, the system does not detect DEC
signal and zero signal in executing machine zero return
1 8 3 *** *** *** MZRY MZRY MZRY MZRZ MARX
Bit4 1: 5
th
press key_ to execute machine zero return ；
0: 5
th
press key_ to execute machine zero return
（
has not defined the press key in the standard
PLC ）
Bit3 1: 4
th
to execute the machine zero return
；
0: 4
th
to execute the machine zero return.
Bit2 1: Y to execute the machine zero return
；
0: Y to execute the machine zero return.
Bit1 1: Z to execute the machine zero return
；
0: Z to execute the machine zero return.
Bit0 1: X to execute the machine zero return
；
0: X to execute the machine zero return.
1 8 8 *** RRTn *** *** ***
［
Data type
］
Bit axis
RRTn 1: when Y,4
th
, 5
th
are rotary axis, the zero return use D mode;