GSK980TDc Turning CNC System User Manual
38
Ⅰ
Progra
mming
Used: used tool life data.
Life unit: count unit of tool life, N1 is the used time (unit: minute), N0 is the used times (unit:
times) . Press
,
to change the count unit of the tool.
State
:
display the tool state
(
0
-
not be used
,
1
-
being used
,
2
-
used
,
3
-
skip
)
.
Press
to change the tool state to skip when the tool is not used in the current window.
Defined group: It only display defined group number and the undefined group number is not
displayed. The displayed group back lighted means that all tool life in this group is
over.
2) Creating and displaying tool group number
A. In tool group state display window, press
, group number,
and the
system display the tool group life data, and when the group does not exist, it is defined to
the new group number( the parameter switch is ON in MDI mode).
Note: After the new group is defined, GSK980TDc will automatically define the first tool,
for example, the new defined group number is 01, the display is as follows:
B. Press
to move the cursor to Defined Group Number.
C. Press
or
to select the group number in Defined Group Number, and to
gradually display content of each group number.
3. Definition of tool life data
There are two ways to set the tool life data: 1) compile NC programs and run the program setting;
2) input directly in the tool life management window.
1) Compile NC programs and run program setting
Command format: G10 L3
Command function: set to be the tool life manage data input mode
Command format: G11
Command function: cancel the tool life management data input mode
Program
Meaning
Remark
O0020 (O0020)
T_: tool and tool offset number;
Содержание GSK980TDc
