GSK GSK980TDc, Руководство пользователя

Страница: 336 / 470

GSK980TDc Turning CNC System User Manual
314
Ⅲ
Connection
Connection between GSK980TDc and DY3
Metal shell
GSK980TDc(CN11,
CN12,CN13,CN14)
DY3 signal interface
Metal shell
Connection between GSK980TDc and DF3
GSK980TDc(CN11,
CN12,CN13,CN14)
Metal shell
DF3 signal interface
Metal shell
Fig. 2-11 GSK 980TDc/GSK980TDc-V CNC systems are connected with GSK drive unit
2.2 Being Connected with Spindle Encoder
2.2.1 Spindle encoder interface definition
2.2.2 Signal explanation
*PCS/PCS,*PBS/PBS,*PAS/PAS are the encoder C, B, A phases differential input signals
respectively, which are received by 26LS32; *PAS/PAS,*PBS/PBS are orthogonal square wave with
phase shift 90°and their maximum signal frequency is less than 1MHz; the encoder pulses for
GSK980TDc are set at will by parameter, the setting range is from 100 to 5000.
Its interior circuit is shown in Fig. 2-13: (n=A, B, C)
Fig. 2-13 Encoder signal circuit
2.2.3 Being connected with spindle encoder interface
GSK980TDc/GSK980TDc-V is connected with spindle encoder shown in Fig. 2-14, and it uses
twisted pair cables. (exemplified by CHANGCHUN YIGUANG ZLF-12-102.4BM-C05D encoder):
Fig.2-12 CN21 encoder interface
(15-core D type male socket)
8: PAS
7: *PAS
6: PBS
5: *PBS
4: PCS
3: *PCS
15: 0V
14: 0V
13: +5V
12: 5V
11: 0V
PnS
*PnS
AM26LS32
Name Explanation
*PAS/PAS Encoder A phase pulse
*PBS/PBS Encoder B phase pulse
*PCS/PCS Encoder C phase pulse