GSK GSK980TDc, Руководство пользователя

Страница: 55 / 470

Chapter 2 MSTF Command
37
Ⅰ
Progra
mming
2. Execute G28 or manual machine reference point return (only the tool offset of coordinate
axis which is executed machine reference point return is cancelled, and another one which is
not executed machine reference point return is not cancelled);
When No.084 is not 1 (2 ～ 32) and target tool number is not equal to current display tool number,
the control sequence and logic of tool post is defined by PLC ladder diagram after commanding T
command, please see User Manual of machine tool manufacturer. GSK980TDc standard PLC ladder
diagram defines as follows: clockwise rotation for selecting tool, counterclockwise rotation for tool
post clamping, directly inputting tool selection signal for tool change. Please refer to
Ⅲ
INSTALLATION & CONNECTION
.
When the system is employed with line-up tool post, No.084 should be set to 1 and different tool
number is executed by different tool offset as T0101, T0102, T0103.
2.3.2 Tool life management
1. Starting tool life management function
The state parameter No.002 Bit0 (TLIF) is the market whether the tool life management function
is valid or not, the corresponding tool life management window is not displayed when it is invalid.
002 Tool life management
Bit 0 Tool life management function is not valid.
1 Tool life management function is valid.
2. Tool life management display window
Press repetitively into the tool life management display window .
1
）
“Tool compensation->tool life” window
The current window displays the life management data of current used tool life management and
defined tool groups. The window is shown below:
Current tool state: display the current used tool life management data;
Tool number: current used tool and tool compensation number;
Group: the group where the tool is;
Life: tool life data, the specified value can be time or number of times according to the different
count N value; press to record the time or clear the times.