GSK GSK980TDc, Руководство пользователя

Страница: 324 / 470

GSK980TDc Turning CNC System User Manual
304
Ⅱ
Operation
6) Release the tool along Z when X does not move, and stop the spindle, measure the
dimensions of the outer circle of the part (e.g. The measuring value is 135mm);
7) Execute G50 X135 command in PROGRAM>MDI page in MDI mode to set the coordinate
of X axis;
8) Switch to tool offset page, and input X135 to No.001 offset;
9) Move the tool to a safe position, and change No. 002 tool;
10) Start the spindle and move the tool to the toolsetting point, as A point in the following figure;
11) Switch to TOOL OFFSET window, move the cursor to No.002 offset and input X135 Z0;
12) Move the tool to a safe position, and change the No. 003 tool ;
13) Start the spindle and move the tool to the toolsetting point, as A point in the following figure;