GSK GSK980TDc, Руководство пользователя

Страница: 280 / 470

GSK980TDc Turning CNC System User Manual
260
Ⅱ
Operation
Position interface doesn’t vary too. The RELATIVE POS and ABSOLUTE POS, DIST TO GO
are refreshed continuously, which is the same as that the machine lock switch is OFF.
2. M, S, T commands can be executed normally.
8.2.4 MST lock
In Auto mode, press to enter the miscellaneous function lock state; The machine carriage
moves without the M, S, T code being executed. The machine lock and MST lock are usually used
together to check the program.
Note: When the MST lock is active, it takes no effect to the execution of M00, M29, M30, M98, M99.
8.2.5 Block skip
When a block in program is not needed to be executed and not to be deleted, this block skip
function can be used. When the block is headed with “/ ” sign and Block skip indicator lights up (panel
key active or external skip input active), this block is skipped without execution in Auto mode. In Auto
mode, press to enter the state that the program skip is valid.
Note: While the block skip switch is off, the blocks headed with “/” signs are executed normally in Auto
mode.
8.3 MPG Trial-cut
The user can use MPG trial-cut function after editing part programs, check the run path of
program. In MPG trial-cut function, rotating MPG controls the execution speed of program, which can
easily check the program error conveniently.
8.3.1 Switching MPG trial-cut mode
Press to enter the MPG trial-cut mode after a machinig program is selected as follows: