GSI Group - Laser Division
JK300HP/JK300P/JK125P
Issue 2.0
Pre-installation and User Manual
Part No: 1EA300E01
Page
67 of 172
6.8.2 Entry/Exit
From/to Main screen.
Text
Key Range
‘Pulse Height’
Value
Shows current value
Enables numeric editing of value.
A new value has immediate effect.
0.0 – 100.0
%
‘Multishot’
Value
Shows current value.
Updates (counts down)
during Multishot
process
Enables numeric editing of value.
When editing, ‘*’ key recalls the last
value used (this recall value is
stored locally)
0 - 999
‘Align Diode’
State
Shows current state
Enables selection of state via edit
keys.
ON, OFF
‘Shutter is Open
[Closed]’
Text toggles between
‘Open’ and ‘Closed’
Opens and closes the Shutter
When pressed to ‘Open’ a confirmation prompt appears which remains until Yes
or No
is pressed.
Press to ‘Close’ has immediate effect (no prompt).
‘Multishot’
Fixed text
Starts a Multishot sequence
When pressed a confirmation prompt appears. Pressing Yes
starts the Multishot sequence
which runs until the sequence is terminated.
Multishot Value is always set to 1 on completion of a sequence.
Disallowed when Laser is in Remote.
6.8.3 Status Bar
The Status bar is displayed and continuously updated.
When editing the Pulse Ht Value, the Status Bar is displayed above the editing keys.
6.9 SETUP
screen
6.9.1 Function
For setting up for manual operation of the laser.
6.9.2 Entry/Exit
From/to Main screen.
Text Key
Range
‘Control’ State
Shows current state
Enables selection of state via edit
keys
Local,
Remote
Edit is disallowed when Control is in Remote.
‘Shutter No’
Value
Shows currently active
shutter
Enables numeric editing of value
Active Shutter No is stored locally
(network has no “active” shutter)
1 - 4
‘Shape No’
Shows currently active
Enables numeric editing of value.
1 - 10
Petitioners Canadian Solar Inc. and Canadian Solar (USA) Inc.
Ex. 1025, p. 67
