GSI Group - Laser Division
JK300HP/JK300P/JK125P
Issue 2.0
Pre-installation and User Manual
Part No: 1EA300E01
Page
31 of 172
2.6 Conditions of Use
The JK300HP/JK300P/JK125P Series Laser must only be used under the following
circumstances:
•
On approved materials.
•
Using an approved process.
•
Under approved conditions.
•
With due and proper authorisation.
WARNING
USE OF CONTROLS, ADJUSTMENTS OF PERFORMANCE OR
PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN
EXPOSURE TO HAZARDOUS RADIATION.
2.6.1 Approved Materials
Approved materials can be processed without hazard to personnel or damage to the Laser
product. These materials have been assessed for their toxicity and fire potential. Approved
materials have an approved process method and recommended arrangements for fume
containment and removal.
2.6.2 Approved Process
An approved process does not present a hazard to the health of personnel or possible
damage to the Laser equipment. The approved process has recommended arrangements
for processing by-products and fume containment and removal.
2.6.3 Approved Conditions
Approved conditions satisfy the requirements of applicable safety standards and statutory
requirements relating to electrical, Laser radiation and health hazards. Approved conditions
meet the requirements of the Plant Safety Officer and the Local Safety Inspectorate.
Petitioners Canadian Solar Inc. and Canadian Solar (USA) Inc.
Ex. 1025, p. 31
