Graco Horizon Fluid Management Systems Скачать руководство пользователя страница 75

Страница: 75 / 108

308607

Horizon System Components

Administrative Keypad

This keypad is needed to set up and make changes to

the system parameters. It can only be connected to the

Master Control Module.

The Administrative Keypad features a complete alpha-

betic keypad in addition to the numbers and navigation

keys of the other two keypads. This enables it to input

the labels for fluids, dispense areas, operator names

and other setup data.

With its full, complex set of keys, it is not intended for

everyday use in requesting dispense jobs, although it

can accomplish those tasks. It can also support the

attachment of a bar code reader.

The Administrative Keypad can be kept in the shop

foreman’s office (or similar location), where it can be

used for occasional system configuration changes.

Another option is for the distributor or installer to keep

this keypad to maintain multiple installations.

Administrative Keypad

06520

Keypad Specifications:

There can only be one Administrative Keypad in the

system, and it can only be connected to the Master

Control Module.

There is only one port for connecting keypads to a

Control Module, therefore, there can only be as

many keypads in a system as there are control

modules.

The entire system (regardless of size) can be

controlled from just one keypad or from multiple

keypads located out on the shop floor.

All of the keypads are connected to the Control

Modules by 25 or 50 ft. (7.6 or 15.3 m) 22 AWG

cables.

The bar-code reader can only be connected to the

Enhanced and Administrative keypads.

There is a wall-mount bracket accessory available

that will accept any of the keypads.

Keypad Wall-mount Bracket

Part No. 191368

Keypad Bracket

Содержание Horizon Fluid Management Systems













































































































Результаты поиска

Содержание Horizon Fluid Management Systems

Отзывы:

Похожие инструкции для Horizon Fluid Management Systems

Бренды по названию

Популярные бренды

Graco Horizon Fluid Management Systems, Инструкция по эксплуатации

Результаты поиска

Содержание Horizon Fluid Management Systems

Отзывы:

Похожие инструкции для Horizon Fluid Management Systems

Бренды по названию

Популярные бренды