![background image](http://html1.mh-extra.com/html/graco/horizon-fluid-management-systems/horizon-fluid-management-systems_instructions-manual_2251039020.webp)
20
308607
System Setup -- Startup
Instructions
Types of Setup
1. SETUP screen appears.
2. Cursor is on ENABLE/DISABLE CAN.
3. Move the cursor by pressing the
"
or
#
key.
4. Press ENTER on the keypad when the cursor is at
the desired selection.
ENABLE/DISABLE CAN:
ENABLE CAN is the default
selection. It indicates that the system has more than
one control module. For normal operation, all control
modules should have CAN enabled. To change to
DISABLE CAN, which must be done for a system with
only one control module, follow page 21.
NOTE:
When a controller’s CAN communication is
disabled, the controller will not send any CAN mes-
sages but it can still receive CAN messages.
MODIFY SETUP:
to modify a current setup. See page
22.
NEW SETUP:
to enter a completely new setup. See
page 22.
CLEAR SETUP:
to clear particular setup options.
Choose CLEAR SETUP if this is the initial setup of a
new system. See page 23.
PRINT SETUP:
to print out selected information about
the control module. If this is the initial setup of a new
system, print out ALL MEMORY after the system is
completely installed, for future reference. See page 24.
UPDATE TABLES:
to send information from one
control module to all connected control modules. If the
Master Control Module was setup off-line, use this
feature to send information to all control modules after
they are connected. See page 25.
DIAGNOSTICS:
to help troubleshoot the system. See
page 26.
Screens
SETUP Screens
_ _ _ _ _ _ _ _ _ _
"
SETUP
A
_ _ _ _ _ _ _ _ _ _
ENABLE/DISABLE CAN
MODIFY SETUP
NEW SETUP
#
_ _ _ _ _ _ _ _ _ _
"
SETUP
A
_ _ _ _ _ _ _ _ _ _
CLEAR SETUP
"
PRINT SETUP
UPDATE TABLES
#
_ _ _ _ _ _ _ _ _ _
"
SETUP
A
_ _ _ _ _ _ _ _ _ _
PRINT SETUP
"
UPDATE TABLES
DIAGNOSTICS
Содержание Horizon Fluid Management Systems
Страница 81: ...308607 81 Appendix...
Страница 97: ...308607 97 Blank Forms...