Graco Horizon Fluid Management Systems, Инструкция по эксплуатации

Страница: 27 / 108

308607 27
System Setup -- Diagnostics
Instructions
Diagnostics (continued)
8. The METERS screen appears with the cursor at
the MONITOR METERS option. If that option is
selected, a screen will appear that allows you to
select meters to check.
9. Scroll to the meter you want to check and press
ENTER. A screen will appear that tells how many
pulses the meter has read . Pressing any key will
return the cursor to the METERS screen.
NOTE: The pulse count clears whenever the sys-
tem is reset or turned off or the meter is cleared
manually (ZERO METER COUNTERS), as ex-
plained below.
If ZERO METER COUNTERS is entered, a screen
appears that allows you to select meters to clear.
Clear (ZERO) the meters as needed.
Press BACK to return to the METERS screen.
10. The KEYPAD screen appears with the cursor at
the second line, which should show the type of
keypad you are using right now. ADMIN/
ENHANCED or BASIC are the two choices.
11. The DIP SWITCHES screen shows the dip switch
setting for the control module the keypad is con-
nected to (CM ID 1 in the screen example). Verify
the unique ID of the controller.
NOTE:
It is critical that the control module address
(CM ID) match the number entered in the setup
tables. If it does not match, the system will not
function properly.
Screens
METERS Screens
_ _ _ _ _ _ _ _ _ _
"
METERS
A
_ _ _ _ _ _ _ _ _ _
MONITOR METERS
ZERO METER COUNTERS
Monitor Meters
SELECT METER NUMBER:
MONITOR METER 7
MONITOR METER 8
MONITOR METER 9
#
MONITORING METER 7:
X PULSES
USE ANY KEY TO CONT.
Zero Meter Counters
_ _ _ _ _ _ _ _ _ _
"
METERS
A
_ _ _ _ _ _ _ _ _ _
MONITOR METERS
ZERO METER COUNTERS
SELECT METER NUMBER:
ZERO ALL METERS
ZERO METER 7
ZERO METER 8
#
METER X COUNTER
CLEARED.
USE ANY KEY TO CONT.
KEYPAD Screen
KEYPAD MODEL:
ADMIN/ENHANCED
"#
"#
ARROWS TO CHANGE
ENTER KEY TO COMMIT
DIP SWITCHES Screen
_ _ _ _ _ _ _ _
"
DIP SWITCHES
A
_ _ _ _ _ _ _ _
1 2 3 4 5 6 7 8
1 0 0 0 0 0 1 1
CM ID: 1