Graco Horizon Fluid Management Systems, Инструкция по эксплуатации

Страница: 30 / 108

30 308607
System Setup -- Save Setup
Instructions Screens
Save Setup
CAUTION
Do not save any setup information while there are
active or waiting jobs in the system. Active or waiting
jobs will be canceled when you save setup. When-
ever a table is saved, power down the system
before it is used again so the software initiates
the changes correctly.
NOTE: The Master Control Module will update the
copied setup files in each Slave Control Module.
1. The SAVE SETUP verification screen will appear
with the cursor on NO .
D
If modifying the setup, pressing ENTER with
NO selected, will return to the SETUP OP-
TIONS screen without saving.
D
If entering a new setup, pressing ENTER with
NO selected, will return to the MODIFY SET-
UP options screen without saving.
2. Scroll to YES by pressing the
#
or
"
key.
3. Press ENTER on the keypad to save the setup
options.
4. A screen will appear to notify you that your save
was successful. Press any key on the keypad to
continue setup.
SAVE SETUP:
"
NO
" #
WARNING:
SAVE WILL CANCEL
ACTIVE/WAITING JOBS
SAVE SETUP:
"
YES
" #
WARNING:
SAVE WILL CANCEL
ACTIVE/WAITING JOBS
TABLE SAVED
SUCCESSFULLY !!!
USE ANY KEY TO CONT.