Field
Value
sponse to a request. If an response has still not been received
after these attempts, the Status is set to
"8
. In Alive Check
=
"
your device attempts to reach the server every 20
seconds. If the server responds, Status is set back to
4
.
Possible values are whole numbers between
and
.
The default value is
. To prevent Status being set to
"8
,
set this value to
.
RADIUS Dialout
Only for Authentication Type =
666
and
63
.
Select whether your device receives requests from RADIUS
server dialout routes. This enables temporary interfaces to be
configured automatically and your device can initiate outgoing
connections that are not configured permanently.
The function is activated by selecting
"
.
The function is disabled by default.
If the function is active, you can enter the following options:
•
>" 4
: Enter the time period in seconds
between update intervals.
The default entry here is
i.e. an automatic reload is not car-
ried out.
2.6.2
permits access control for your device, network access servers (NAS) and oth-
er network components via one or more central servers.
Like RADIUS, is an AAA protocol and offers authentication, authorisation and
accounting services ( Accounting is currently not supported by bintec elmeg
devices).
The following functions are available on your device:
• Authentication for login shell
• Command authorisation on the shell (e.g. telnet, show)
uses TCP port 49 and establishes a secure and encrypted connection.
2 System Management
Gigaset Communications GmbH
34
hybird 120 Gigaset Edition