Gigaset Pro series Hybird 120 Скачать руководство пользователя страница 404

Страница: 404 / 423

Field

Description

Remote Port

Shows the remote port.

Packets

Shows the total number of incoming and outgoing packets.

Bytes

Shows the total number of incoming and outgoing bytes.

Errors

Shows the total number of errors.

IKE (Phase-1) SAs (x)

Role / Algorithm / Life-
time remaining /
Status

The parameters of the IKE (Phase 1) SAs are displayed here.

IPSec (Phase-2) SAs
(x)

Role / Algorithm / Life-
time remaining /
Status

Shows the parameters of the IPSec (Phase 2) SAs.

Messages

The system messages for this IPSec tunnel are displayed here.

18.3.2 IPSec Statistics

In the Monitoring->IPSec->IPSec Statistics menu, statistical values for all IPSec con-
nections are displayed.

The Monitoring->IPSec->IPSec Statistics menu consists of the following fields:

Fields in the Licences menu

Field

Description

IPSec Tunnels

Shows the IPSec licences currently in use (In Use) and the
maximum number of licenses usable (Maximum).

Fields in the Peers menu

Field

Description

Status

Displays the number of IPSec tunnels by their current status.

• Up: Currently active IPSec tunnels.

• Going up: IPSec tunnels currently in the tunnel setup phase.

• Blocked: IPSec tunnels that are blocked.

• Dormant: Currently inactive IPSec tunnels.

18 Monitoring

Gigaset Communications GmbH

392

hybird 120 Gigaset Edition

Содержание Pro series Hybird 120








































































































































































































































































































































































































































Результаты поиска

Содержание Pro series Hybird 120

Отзывы:

Gigaset Pro series Hybird 120, Руководство пользователя, Страница: 404 / 423

Результаты поиска

Содержание Pro series Hybird 120

Отзывы: