for this internal subscriber, you can pick it up by pressing this connection key.
• Team key: A team key is a normal line key to which the internal number of a team is as-
signed. The LED assigned to the team key indicates the team status (call, connec-
tion,...). If a call is signalled for this team, you can pick it up by pressing the team key.
Call waiting
As far as possible, you want to accept calls from every customer, even while you're
already on the phone. If another call is signalled to your phone by a call-waiting tone or
display notification, you can decide with which of two customers you wish to speak.
If a currently engaged subscriber is called, she gets automatic call-waiting. Call-waiting is
possible for internal and external calls. The call-waiting connection is signalled to the
called party visually and/or acoustically, depending on the terminal.
The called party can:
• Decline the call-waiting connection and proceed with the current call. The caller is then
signalled "engaged".
• Accept the call-waiting connection and hold the current connection.
• Accept the call-waiting connection after the current connection is ended.
• Ignore the call-waiting connection. Call-waiting automatically ends after 30 seconds and
the caller hears a "busy" signal.
Analogue terminals
The call-waiting option can be individually configured for every subscriber. Allowing call
waiting or not can be set via configuration or via a code number in operations.
Analogue terminals get the system call waiting tone. The number of the call-waiting party
can be shown in the analogue telephone display if it features the corresponding perform-
ance feature (CLIP off Hook). CLIP off Hook is disabled for analogue terminals in the ba-
sic setting, but may be enabled via configuration.
Call waiting can only occur simultaneously in the system for a limited number of analogue
connections. If call waiting is already operating with this maximum number of call-waiting
tones on analogue connections, additional call-waiting callers will get the busy tone.
If you hear the call-waiting tone during a call, you can take that call and transfer the ongo-
ing call An operating procedure allows transfer of the ongoing call and acceptance of the
call waiting. The following conditions apply here:
• Every dialled number is accepted by the system.
• After the operation procedure, the subscriber and the call-waiting subscriber are imme-
diately connected to each other (no acknowledge tones).
Gigaset Communications GmbH
5 Numbering
hybird 120 Gigaset Edition
95