Field
Description
•
8
(default value): You can create a new class plan with
this setting.
•
* !! 1,
: Shows a class plan that has
already been created, which you can select and edit. You
can add new filters.
Description
Only for Class map =
8
Enter the name of the class plan.
Filter
Select an IP filter.
If the class plan is new, select the filter to be set at the first
point of the class plan.
If the class plan already exists, select the filter to be attached
to the class plan.
To select a filter, at least one filter must be configured in the
Networking->QoS->QoS Filter menu.
Direction
Select the direction of the data packets to be classified.
Possible values:
•
: Incoming data packets are assigned to the class
(Class ID) that is then to be defined.
•
(default value): Outgoing data packets are as-
signed to the class (Class ID) that is then to be defined.
•
(
: Incoming and outgoing data packets are assigned to
the class (Class ID) that is then to be defined.
High Priority Class
Enable or disable the high priority class. If the high priority
class is active, the data packets are associated with the class
with the highest priority and priority 0 is set automatically.
The function is enabled with
"
.
The function is disabled by default.
Class ID
Only for High Priority Class not active.
Choose a number which assigns the data packets to a class.
10 Networking
Gigaset Communications GmbH
204
hybird 120 Gigaset Edition
