(d) Number of the virtual interface
Example:
''
(first virtual interface based on the first interface on the first Ethernet
port)
2.4.1 Interfaces
You define separately whether each interface is to operate in routing or bridging mode.
If you want to set bridging mode, you can either use existing bridge groups or create a
new bridge group.
The default setting for all existing interfaces is routing mode. When selecting the option
8 (" .1
for Mode / Bridge Group, a bridge group, i.e.
,
etc. is
automatically created and the interface is run in bridging mode.
The System Management->Interface Mode / Bridge Groups->Interfaces menu con-
sists of the following fields:
Fields in the Interfaces menu
Field
Description
Interface Description
Displays the name of the interface.
Mode / Bridge Group
Select whether you want to run the interface in
>
$"
or whether you want to assign the interface to an existing
(
,
etc.) or new bridge group (
8 (" .1
).
When selecting
8 (" .1
, a new bridge group is
automatically created after you click the OK button.
Configuration Inter-
face
Select the interface via which the configuration is to be carried
out.
Possible values:
•
3
(default value): Ex works setting The right
configuration interface must be selected from the other op-
tions.
•
: No interface is defined as configuration interface.
•
* ,
: Select the interface to be used for
configuration. If this interface is in a bridge group, it is as-
signed the group's IP address when it is taken out of the
group.
Gigaset Communications GmbH
2 System Management
hybird 120 Gigaset Edition
23
