SOFTWARE MANUAL C32
12 LINE MODE GeBE A8 STANDARD COMMAND SET
All A8 commands explained in this manual are summed up as follows:
Command
ASCII
Function
Synchron Cancel
<CR>
Start printing with line feed
Syn/Asyn no
<FF>
Feed to the next label mark
<LF>
Start printing with line feed
<ESC> "A"
Erasing data in the printer buffer
<ESC> "a"
Automatic status transfer
<ESC> "b"
Stop automatic status transfer/ reset printer parameters to default
<ESC> "C" n
Cut off paper
<ESC> "c" n
Print bar code
<ESC> "D" n
Print in text mode / data mode
<ESC> "d" n
Initialize printer
<ESC> “e” n m
End of Ticket
<ESC> "F" nh nl
Paper feed 1-2400 lines (300 mm max.)
<ESC> "g" n g1....gn
Pixel graphics PCL5, print graphics line with n byte length
<ESC> "H" n
Text zoom vertical, character height of
<ESC> "I" n
Print in black and white/white in black
<ESC> "i"
Positioning in one line (left / right, centered)
<ESC> "J" n
Bold on /off
<ESC> "k"
Return actual status
<ESC> "L" n
Print with and without underlining
<ESC> "m" n
Set graphics mode
<ESC> "N" n
Character tab Character superposition
<ESC> "n" n, m, ...
Character superposition
<ESC> "P" n
Select character set no. n
<ESC> "Q"
<Parameter> <Value> Setup printer, parameter addresses
(realized are 3,13,14,16,20,22)
<ESC> "q"
Set Top of Form
<ESC> "R" n
Relative character tab
<ESC> "S" n
Set character spacing
<ESC> "s" n
Set line spacing (leading)
<ESC> "T“ n
Call up batch data
<ESC> "v" n
Sync command
<ESC> "W" n
Text zoom horizontal
<ESC> "@"
Initializing printer, reset
<ESC> "\" nh nl
Paper backfeed for 1-2400 lines (300 mm max.)
<ESC> "/" nh nl
Locked paper backfeed for 1-2400 lines
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 90 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
