SOFTWARE MANUAL C32
16 SETTING AND OUTPUT OF SYSTEM VARIABLES
16.1 IDENTIFIER FOR SYSTEM VARIABLES
The following variable identifiers are recognized by the commands for printing or setting of system variables.
[Identifier]
TCount
(short form
TC
)
[Note]
Setting a ticket number is only exceptionally necessary because the system counts them
automatically. The value range for ticket numbers reaches from 0 to 4294967295 (=
0xFFFFFFFF), i.e. it covers the complete 32 bit value range. Once the maximum value is
reached the ticket counter will be reset to 0 for the following ticket (wrapping).
16.2 PRINTING A SYSTEM VARIABLE
This command prints the actual variable value at the beginning of the ticket print.
[Command identifier]
Vp
[Parameter]
System variable identifier
[Example]
Printing the ticket counter
[GeBE#Vp TC]
Note: A variable frame can only describe the value of one variable. So this command automatically opens a new frame.
16.3 SETTING A SYSTEM VARIABLE
[Command identifier]
Vs
[1. Parameter]
System variable identifier
[2. Parameter]
System variable value
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 123 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
