GeBe C32, Руководство пользователя программного обеспечения

Страница: 92 / 166

SOFTWARE MANUAL C32
12.3.3 FORM FEED
[Name] Form Feed
[Format] ASCII <FF>
Hex 0Ch
Decimal 12d
[Description] Feed to the next label mark, if label mode is active. Without label mode <FF> produces a line feed by the
set number of dotlines according to parameter x,y.
12.3.4 PAPER FEED FORWARDS
[Name] Feed Paper
[Format] ASCII <ESC> “F“ nh nl
Hex 1Bh 46h nh nl
Decimal 27d 70d nh nl
[Description] Paper feed by l lines: = (lh x 256 + ll) lines.
This command is only possible at the beginning of a line. Elsewhere it is ignored.
Transport is limited to 500 dotlines. This matches with 4000 lines at 203dpi or 6000 lines at 300dpi.
Corresponding setting in
parameter 41,3.
[Name] Feed Paper to Sensor
[Format] ASCII <ESC> “f“ <lH> <lL> <bDir> <sSensorsH> <sSensorsL> <sConditionsH> <sConditionsL>
Hex 1Bh 66h <lH> <lL> <bDir> <sSensorsH> <sSensorsL> <sConditionsH> <sConditionsL>
Dezimal 27d 102d <lH> <lL> <bDir> <sSensorsH> <sSensorsL> <sConditionsH> <sConditionsL>
[Description] Paper feed by l lines: = (lh x 256 + ll) lines.
This command feeds until a sensor condition is reached but max. (lh x 256 + ll) lines.
lH feed length high byte
lL feed length low byte
bDir backward = ffhex / forward = 01hex
sSensorsH
sSensorsL
Bit 12 – 15 = 0
Bit 11 : AUX7
Bit 10 : AUX6
Bit 9 : AUX5
Bit 8 : -----
Bit 7 : HEAD UP
Bit 6 : -----
Bit 5 : PE
Bit 4 : AUX4
Bit 3 : AUX3
Bit 2 : AUX2
Bit 1 : AUX1
Bit 0 : NPE
sConditionsH corresponding bits to „sSensors“
sConditionsL
0 := Stop if sensor does not detect paper
1 := Stop when sensor detects paper
GeBE Elektronik und phone +49.89.894141-0 GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH fax +49.89.894141-33 date July 7, 2020
Beethovenstraße 15 page 92 | 166
82110 Germering email info@gebe.net Our general terms of business are to be applied.
Germany Internet www.gebe.net Errors and changes reserved.