GeBe C32, Руководство пользователя программного обеспечения

Страница: 23 / 166

SOFTWARE MANUAL C32
Module 17 Renderer
17,1 e_w number of job buffer elements
17,2 e_w number of object list elements
17,3 e_w size of renderer RAM [byte]
17,4 u_a number of leftmost dot within printing area 0: no left margin
17,5 u_a number of leftmost dot beyond printing area / at least printer width 0: no right margin
17,6 u_a number of topmost dot line from top of form within printing area 0: no top margin
17,7 u_a number of topmost dot line from top of form beyond printing area 0: uncapped
17,23 u_w basic scaling factor X HINT: Restrictions on barcodes and logos
17,24 u_w basic scaling divisor X HINT: Restrictions on barcodes and logos
17,25 u_w basic scaling factor Y HINT: Restrictions on barcodes and logos
17,26 u_w basic scaling divisor Y HINT: Restrictions on barcodes and logos
17,27 u_w system font initial scaling factor width
17,28 u_w system font initial scaling divisor width
17,29 u_w system font initial scaling factor height
17,30 u_w system font initial scaling divisor height
17,31 u_w AddOn font initial scaling factor width
17,32 u_w AddOn font initial scaling divisor width
17,33 u_w AddOn font initial scaling factor height
17,34 u_w AddOn font initial scaling divisor height
17,35 u_w RAM logo buffer size
Module 18 Print
18,1 e_w size of image drum [dot lines]
18,2 e_w starting speed of printer motor [mm/s]
18,3 u_a maximum speed of printer motor [mm/s] (max.=500)
18,4 u_a maximum backwards speed [mm/s] (max.=500)
18,5 e_w printer motor backlash [dot lines]
18,6 u_a printing density default = 25
18,7 u_a bytes per soft strobe
18,8 u_a heated bytes per soft strobe
18,9 e_a latency after stall condition [ms] default = 40
18,10 u_w stall timeout [ms]
18,11 r/o motor follow-up time [ms]
18,12 u_a ticket length control 1: enabled / 0: disabled
18,13 u_a blackmark minimum length [dot lines] default = 3 dot lines
number of black lines until detection of blackmark
18,14 u_a blackmark sensor index 0: PaperEnd
1: AUX1 / 2: AUX2 / 3: AUX3 / 4: AUX4
5: AUX5 / 6: AUX6 / 7: AUX7
18,16 u_a distance from start of most recent blackmark to form feed position [dot lines] TOF = 0 dot lines
18,17 u_a number of segments per ticket 0: variable number
blackmarks per ticket 0-31 default = 0
0: each blackmark is used and is overwriteable
1: each blackmark is used, too long printouts will be cut
2: every other blackmark is used, too long printouts will be cut
3: every third blackmark is used, too long printouts will be cut
18,21 u_a Autoload 1: enabled / 0: disabled
GeBE Elektronik und phone +49.89.894141-0 GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH fax +49.89.894141-33 date July 7, 2020
Beethovenstraße 15 page 23 | 166
82110 Germering email info@gebe.net Our general terms of business are to be applied.
Germany Internet www.gebe.net Errors and changes reserved.