SOFTWARE MANUAL C32
16.5 HIGHER LEVEL COMMANDS FOR TICKET CONTROL
16.5.1 STARTING A TICKET
This command initializes the internal data structures for the start of a new ticket.
The frame orientation can be specified as an optional parameter.
Without setting the basic orientation in the SoT command,
the basic orientation preset via
system parameter 14,3
is selected for the ticket,
e.g. [GeBE # SoT90]
[Command identifier]
SoT
16.5.2 REPEATING A TICKET
This commands indicates the number of ticket repetitions.
(Parameter = 0: print ticket once, no repetition). With each print the ticket number increments by 1.
[Command identifier]
TRepeat
[Parameter]
Number of repetitions
16.5.3 COPYING TICKET
This command indicates the number of ticket copies.
(Parameter = 0: print ticket once, no copy).
Ticket number remains the same for all copies and is incremented after the last copy.
[Command identifier]
TCopy
[Parameter]
Number of copies
16.5.4 END OF TICKET
This command starts the ticket print.
[Command identifier]
EoT
16.6 REQUESTING STORED COMMAND SEQUENCES
It is advisable to file often needed series of command sequences in the AddOn of the flash memory and to open them if
needed.
[Command identifier]
CannedC
(short form
CC
)
[Parameter]
Serial number of the stored sequence.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 125 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
