SOFTWARE MANUAL C32
14.3 COMMANDS FOR TEXT FRAMES
These commands need to be issued before the text is entered. An open text frame may be closed.
14.3.1 ALIGNMENT OF TEXT FRAME CONTENTS
This command is available for text frames only and defines the text alignment (in relation to the coordinate system of the
frame). It is not possible to change the alignment for individual lines or paragraphs of the frame. In this case the text has
to be devided into several frames.
Command identifier:
Align (short form A)
[Parameter]
series of two characters
•
TL > top left
•
CL > centered left
•
BL > bottom left
•
TC > top centered
•
CC > centered
•
BC > bottom centered
•
TR > top right
•
CR > centered right
•
BR > bottom right
[Examples]
place centered text vertically in the centre of the frame
•
ACC
place right aligned text top right of the frame
•
Align TR
14.3.2 AUTOMATIC WORD WRAPPING
(to the letter)
This command is available only for text frames.
[Command identifier]
WrapC
[Parameter]
Boolean: T = enabled, F = disabled
[Description]
When automatic word wrapping is activated the text is automatically wrapped to the letter
when the preset width of the frame is reached. Otherwise parts of the line may be clipped.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 117 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
