SOFTWARE MANUAL C32
20.7.3.1 COMMAND DELETE PERMANENT TICKET LENGTH
<dpl>
This command activates the automatic measuring function of the printer after poweron. It is used whenever a <pl #> or a
<tl #> command is to be deleted and clears the stored printing length.
20.8 REPEAT COMMAND
<RE#>
The repeat command allows the user to print multiple copies without retransmitting the ticket. The # gives the number of
ticket copies in addition to the first one. The repeat command can be sent anywhere in the data stream prior to the print
command.
20.9 COMMAND PRINT RESIDENT LOGO
<LO#>
This command causes pre-loaded logos to be printed on the ticket. For further details see the logo supplement.
This command must be preceded by a starting point, <SP # #> command.
20.10 COMMAND DRAWING
20.10.1 COMMAND DRAW BOX
<BXr,c>
This command makes the printer draw a box "r" dot rows tall and "c" dot columns wide. We recommend a row/column
command subsequently to prevent any confusion concerning the cursor position.
20.10.2 COMMAND DRAW VERTICAL LINE
<VXr>
This command makes the printer draw a vertical line with the length of "r" dots and the width of 1 dot. We recommend a
row/column command subsequently to avoid confusion concerning the cursor position.
20.10.3 COMMAND DRAW HORIZONTAL LINE
<HXc>
This command makes the printer draw a horizontal line with the length of "c" dots and the width of 1 dot. We recommend
a row/column command subsequently to avoid confusion concerning the cursor position.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 148 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
