SOFTWARE MANUAL C32
19.4 NOT YET EMULATED COMMANDS
The following commands of the N78 system are not emulated at the moment.
Commands are read and cancelled.
Command description value range
<ESC> "a" n
Print time
<ESC> "B" n
Trigger sound
<ESC> "c" n,m,...,x
Set time / alarm
<ESC> "d" n
Read clock via host interface
n:= {0}
<ESC> "E" n
Old powerdown or PCL3 start
n:= {0,1}
<ESC> "G" n,m,...,x
Old graphics line
(length = printer width)
<ESC> "h" n
Set virtual width of printer mechanism
<ESC> "i" n
Initialize host interface
<ESC> "K" n
EPSON column graphics
<ESC> "M" n
Print black / grey
n:= {0,1}
<ESC> "n" n,m,...,x
Return data string to host
<ESC> "O" n
Print out of T menue
<ESC> "p" n,m
Set distance to dotline of printer mechanism
<ESC> "q" n
Old command 'esc_switch_pe_konserve' (konserve = standard text)
<ESC> "r" n,m,...,x
Configure battery charging connection
<ESC> "s" n,m,...,x
Save batch file
<ESC> "T" x
Print batch file no. x
x:= { A, Q, R, S)
<ESC> "U" n
Ignore the following amount of characters
<ESC> "u" n,m,...,x
Erase batch file (with password)
<ESC> "v" n,m,...,x
Erase statistics (with password)
<ESC> "X" n
Read analog value
<ESC> "x" n
Enable / disable error saving
<ESC> "y" n
Set energy saving mode LED (flash)
<ESC> "Z" n
Set PWM parameter
<ESC> "z"
Set HexDump mode
<ESC> "]" n,m
Set baudrate ESC ]
<ESC> "{" n,m,...,x
Battery test
<ESC> "}" n
Set minimum mark length
<ESC> "_" (n)
Wait until ticket removal
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 143 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
