GE Vivid in, Руководство по обслуживанию

Страница: 172 / 740

GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1 V
IVID
I
N AND
V
IVID Q
N S
ERVICE
M
ANUAL
3-104 Section 3-10 - Connectivity Setup
The Local Area Connection Properties dialog box opens.
4) Select
Internet Protocol (TCP/IP)
.
5) Click the
Properties
button.
The Internet Protocol (TCP/IP) Properties dialog box opens.
6.) Activate the
Use the following IP address
check box.
7) Type in the network computer’s
IP address 10.0.0.2
.
Note:
The IP address must be different from the one used for the Vivid i n/ Vivid q N system.
8) Type in the
Subnet mask 255.255.255.0
.
Note:
The Subnet mask should be the same for both the network computer and the
Vivid i n/ Vivid q N.
9) Click
OK
, close all windows and approve all changes. Return to regular mode.
10) Connect the Vivid i n/ Vivid q N and network computer LAN connection using a cross over Network
cable. (Normally with RED connector covers on both sides, cable not longer than 100 meters).
The Vivid i n/ Vivid q N and the network computer are now ready for export, import of files.
Note:
One can check the connection by pinging to the Vivid i n/ Vivid q N IP, as follows:
Figure 3-108 Local Area Connection Properties
Figure 3-109 Internet Protocol (TCP/IP) Properties