GE SF6 Скачать руководство пользователя

Страница: 3 / 300

Content

Instruction Manual

GE Information

04- 2017

D1736EN/03

3/10

Copyright Notice

The information contained in this online publication is the exclusive prop-

erty of General Electric Company, except as otherwise indicated. You may

view, copy and print documents and graphics incorporated in this online

publication (the “Documents”) subject to the following: (1) the Documents

may be used solely for personal, informational, non- commercial purposes;

(2) the Documents may not be modified or altered in any way; and (3)

General Electric Company withholds permission for making the Docu-

ments or any portion thereof accessible via the Internet. Except as

expressly provided herein, you may not use, copy, print, display, repro-

duce, publish, license, post, transmit or distribute the Documents in whole

or in part without the prior written permission of General Electric Company.

The information contained in this online publication is proprietary and sub-

ject to change without notice. The software described in this online publi-

cation is supplied under license and may be used or copied only in accor-

dance with the terms of such license.

Trademark

Notices

GE and the GE logo are trademarks and service marks of General Electric

Company

* Trademarks of General Electric Company.

Cisco is a registered trademark of Cisco Corporation.

Hyperterminal is a registered trademark of Hilgraeve, Incorporated.

IEC is a registered trademark of Commission Electrotechnique Interna-

tionale.

IEEE and POSIX are registered trademarks of the Institute of Electrical

and Electronics Engineers, Inc.

NEMA is a registered trademark of National Electrical Manufacturers

Association

ASME is a registered trademark of The American Society of Mechanical

Engineers.

Internet Explorer, Microsoft, and Windows are registered trademarks of

Microsoft Corporation.

JAVA is a registered trademark of Oracle Corporation,

Modbus is a registered trademark of Schneider Automation, Inc.

Netscape is a registered trademark of Netscape Communications Corpora-

tion.

SEL is a registered trademark of Schweitzer Engineering Laboratories, Inc

Other company or product names mentioned in this document may be

trademarks or registered trademarks of their respective companies.

This equipment contains Fluorinated Greenhouse Gas (SF

) covered by the Kyoto Protocol, which

has a Global Warming Potential (GWP) of 22200. SF

should be recovered and not released into the

atmosphere. For further information on the use and handling of SF

, please refer to IEC 62271:

High-Voltage Switchgear and Controlgear - Part 303: Use and Handling of Sulphur Hexafluoride

(SF

Содержание SF6













































































































































































































































































































Результаты поиска

Содержание SF6

Отзывы:

Похожие инструкции для SF6

Бренды по названию

Популярные бренды

GE SF6, Инструкция по эксплуатации

Результаты поиска

Содержание SF6

Отзывы:

Похожие инструкции для SF6

Бренды по названию

Популярные бренды