GE H48651KR, Руководство по обслуживанию

Страница: 362 / 516

GE V
OLUSON
i / V
OLUSON
e
D
IRECTION
KTI106052, R
EVISION
10 S
ERVICE
M
ANUAL
8-20 Section 8-2 - System Software - Installation/Upgrade Procedure
8-2-2-5 System Software - Installation Procedure (FMI from external device)
(cont’d)
19.)The system is rebooting into windows (Boot screen -
Voluson
).
20.)Please wait until all processes are finished. Finally the 2D screen is displayed on the monitor.
NOTE: If the BT warning dialog ( Figure 8-27 below) appears, enter the Permanent key previously recorded
(refer to Figure 8-17: Option page (e.g., Voluson i) on page 8-15 ) and then click
SUBMIT
.
21.)Remove the Stick from the USB port on the rear of the system.
22.)
Reconnect the external devices
, install all the printers and adjust the printer settings as described
in Section 3-7 "Printer Installation" on page 3-80 .
23.)Check and match system settings in the
P1-P2-P3
page´s [Print], [Save] and [Export] tab.
24.)Confirm that the date and time are set correctly and that the Windows automatic DST feature is off.
Refer to Section Section 6-10 "Daylight Saving Time (DST) - New Dates" on page 6-12 .
Figure 8-26 automatic processes are running
Figure 8-27 Enter Permanent key
enter “Permanent key”
then click [Submit]