GE H48651KR, Руководство по обслуживанию

Страница: 358 / 516

GE V
OLUSON
i / V
OLUSON
e
D
IRECTION
KTI106052, R
EVISION
10 S
ERVICE
M
ANUAL
8-16 Section 8-2 - System Software - Installation/Upgrade Procedure
8-2-2-5 System Software - Installation Procedure (FMI from external device)
The system software installation procedure starts with saving and recording the settings present on the
system (silent “Rollback”). Then the new software is written to the hard disk using the Stick.
Application Settings are automatically updated, to match with new Software version.
Existing User Programs, 3D/4D Programs and Auto Text remain unaffected! Afterwards the new
software is configured such that it is integrated again in its environment.
NOTE: For more information about “FMI from external device” refer to Section 5-13-2-2-2 on page 5-54 .
1.) Perform Preparations as described in Section 8-2-2-4 on page 8-13 .
2.) If not already done, disconnect all external USB devices.
3.) Insert the Stick into the USB port on the rear of the system.
4.)
Restart
the system. (Turn system OFF and then back ON)
5.) After system restart, press the
UTILITIES
key on the alphanumeric keyboard.
6.) Select the SYSTEM item from the Utilities menu on the left side of the screen.
7.) Select the
SERVICE
page.
8.) Type in the password SHE and click ACCEPT.
9.) Click on the FMI FROM EXTERNAL DEVICE button for updating the System Software.
CAUTION
!! CAUTION:
Disconnecting ALL external USB devices is NECESSARY
(also the DVD-Drive).
Re-installation
of any previously attached printer has to be done after the upgrade procedure.
Note:
Installing the Bluetooth Printer and its connection set is not possible by the user.
NOTICE
!! NOTICE:
If the system boots into LINUX, the “Boot priority order” in BIOS is
incorrect
.
In this case, cancel the software installation procedure (select Exit/Reboot by means of the [Arrow] keys
(right, left, up, down) and the [Enter] key on the keyboard) and then contact your service representative.
Figure 8-18 Service Tools
NOTICE
!! NOTICE:
Please verify that you have recorded the
Permanent key
(see: Figure 8-17 on page 8-15 ).
[FMI from external device]
button