GE H48651KR, Руководство по обслуживанию

Страница: 186 / 516

GE V
OLUSON
i / V
OLUSON
e
D
IRECTION
KTI106052, R
EVISION
10 S
ERVICE
M
ANUAL
3-116 Section 3-12 - Network IP Address Configuration
Section 3-12
Network IP Address Configuration
NOTE: Following Information must be provided by customer or hospital engineer before you can start:
A Station name, AE Title, IP address and Port Number for the Voluson i / Voluson e.
The IP addresses for the default gateway and other routers at the site for ROUTING INFORMATION.
Only if necessary (e.g. for Internet access).
NOTE: If the Voluson i/e is connected to the Voluson Station this procedure programs the LAN Connector in
the Voluson Station otherwise the LAN connector in the Voluson i / Voluson e.
3-12-1 Network Configuration
1.) Press the
UTILITIES
key on the keyboard once to display the Utilities menu.
2.) Select SYSTEM and then open the
NETWORK
page on the System Setup desktop screen.
3.) Click the NETWORK CONFIGURATION button, read the message and confirm with YES.
4.) The “Internet Protocol (TCP/IP) Properties” dialog page appears.
To specify a DICOM
®
Address, follow the instructions in the Basic User Manual of the Voluson i/e.
Figure 3-136 Network Configuration
Figure 3-137 Internet Protocol (TCP/IP)
click Network Configuration button, read
message and afterwards confirm with Yes
You can get IP and DNS settings assigned
automatically if your network supports this capability.
If fixed IP address is required, you need to ask your
network administrator for the appropriate settings.
Type in: * IP address
* Subnet mask
* Default gateway
* DNS server
NOTE: This example shows fictional numbers!