GE GEK-106273L, Инструкция по эксплуатации, Страница: 124 / 209

KEYPAD AND DISPLAY
GEK-106273L MIF Digital Feeder Protection 8-23
The mnemonics in figure 8.13 stand for:
OPERATIONS Commands or Operations to be performed from the relay.
RESET LEDS Reset Command for the faceplate Target LEDs and latching of auxiliary contacts in
OPTION 1 and OPTION 2 models.
RST THERMAL Reset Command for the Thermal Image Unit.
ACT TABLE1 Set Table 1 as the Active Table.
ACT TABLE2 Set Table 2 as the Active Table.
OPEN BREAKER Breaker opening.
CLOSE BREAKER Breaker closing.
RST OPENINGS Reset openings (OPTION 2 models).
RST I2T Reset of accumulated value of I
2
t counter (OPTION 2 models).
CNF CONFIRM OK Confirm that the command must be executed.
Once the operation to be performed has been found, using the “+” and “-“ keys, press Enter to select it, and then
press Enter again to confirm that the command must be executed. Then the text OK will appear in the display.