GAC Trumpchi GS4, Руководство пользователя

Страница: 234 / 287

4. Maintenance
Adding coolant
- Only add new coolant.
- If you finish, make sure the coolant level
is between the MAX and MIN marks and
above the MIN mark at least. - M a k e
sure the coolant level is at or below the
MAX mark.
Close coolant expansion tank cover
- Re-install and tighten the reserve tank
cap.
When the engine is cold, the coolant level may
exceed the MAX mark slightly.
Note
Do not add coolant until the engine cools
down. If you finish, make sure the coolant
level is at or below the MAX mark. Other -
wise, the excess coolant will spill out of
the cooling system when the engine be -
comes hot.
If the coolant is needed to be added, only
add new coolant. The coolant must be
compliant with this manual. If the DF-6
additive is unavailable temporarily, do not
add other type of additive. If necessary,
you can add pure water temporarily. But,
to restore the normal concentration, you
must add the recommended additive as
required as soon as possible.
A28 V5_2016-04-11.indd 313 2016/7/11 16:05:20
228