Fujitsu NSS8 and NSS12 Скачать руководство пользователя страница 153

Страница: 153 / 230

133

6.2 Error messages of the Operator panel

SOL

ING COMMON PR

OBLEMS

■

Temporary Errors

[U] and a number will be displayed alternately.

* When pushing the [Scan] or [Send to] button, the error indication on the function number display will

disappear and the scanner goes into the ready status.

Display

Meaning

Solution

A paper jam occurred.

1. Remove the jammed document. Refer to

“6.1

Clearing Document Jams” on page 130

2. Confirm if the document conditions are appropri-

ate for scanning with the ADF. (Refer to

“7.2

Document Quality” on page 153

)

A Multifeed occurred.

When pushing the [Send to] on the Operator panel,
the multi fed papers will be ejected.

The ADF or the Pre-Imprinter cover is opened.

Close the ADF cover or Pre-Imprinter cover cor-
rectly.

The print cartridge of the imprinter (sold sepa-
rately) is not set.

This error occurs only when the imprinter option
(sold separately) is used.
Refer to the

“fi-590PRF/fi-590PRB Imprinter

Operator Guide”

for further details.

One of the following error occurred:
1. Document sensors are dirty.
2. The stacker is full.
3. The Brake roller or Separator rollers are not

installed properly.

1. Clean the document sensors.

For details, refer to

“4.5

Cleaning the Trans-

port path and the sensors

” on page 110.

2. Verify that the number of sheets ejected to the

stacker is below stacker’s capacity, and that the
Pick roller is not set for manual feeding.

3. Verify that the both rollers are installed properly.

For details, refer to

“5.5 Replacing the Separator

Rollers” on page 124

and

“5.6 Replacing the

Brake roller” on page 127

Содержание NSS8 and NSS12







































































































































































































































Результаты поиска

Содержание NSS8 and NSS12

Отзывы:

Похожие инструкции для NSS8 and NSS12

Бренды по названию

Популярные бренды

Fujitsu NSS8 and NSS12, Руководство оператора

Результаты поиска

Содержание NSS8 and NSS12

Отзывы:

Похожие инструкции для NSS8 and NSS12

Бренды по названию

Популярные бренды