Fujitsu NSS8 and NSS12 Скачать руководство пользователя страница 104

Страница: 104 / 230

3.5 Excluding a Color from the image (drop out color)

Dropout Image

The image as it will be generated after the dropout is displayed.

Dropout color

The selected dropout color will be shown as numeric value and as color sample.
You can enter a numeric value directly or use the [

▲

]/[

▼

] buttons to change the dropout color.

Priority Black

If you do not wish to drop out text from the image, please mark “Priority Black”.

Colors of low saturation (like black), that are used normally for texts will not be dropped out by this
function.

Sensitivity:

The sensitivity for the detection of the selected color to be dropped can be adjusted.

Setting range: 5 - 180 degree (default setting: 15 degrees)

The bigger the value for the sensitivity is set, the color range (tones) of the selected dropout color becomes

wider (i. e. the tolerance for the color detection gets bigger).

[File...] button

An arbitrary image file (*.bmp format) can be displayed in [Original Image].

[Apply] button

The settings made in this screen will be applied and the window is closed.

[Cancel] button

The settings made in this screen will be aborted and the window is closed.

Click [OK] button.

[TWAIN Driver] dialog box will be redisplayed.
Then, scan the documents using this dialog box.

Содержание NSS8 and NSS12







































































































































































































































Результаты поиска

Содержание NSS8 and NSS12

Отзывы:

Похожие инструкции для NSS8 and NSS12

Бренды по названию

Популярные бренды

Fujitsu NSS8 and NSS12, Руководство оператора

Результаты поиска

Содержание NSS8 and NSS12

Отзывы:

Похожие инструкции для NSS8 and NSS12

Бренды по названию

Популярные бренды