manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY BX, Описание

Поделиться
Скачать
Page 621
Fujitsu Siemens Computers PRIMERGY BX Скачать руководство пользователя страница 621

Internet Group Management Protocol (IGMP) Commands

                                  Command Reference   

Lan Switch and Router Blade

 

621 

IGMP Admin Mode 

This field displays the administrative status of IGMP. This is a configured 

value. 

Interface 

Valid slot and port number separated by forward slashes. 

Interface Mode 

This field indicates whether IGMP is enabled or disabled on the interface. 

This is a configured value. 

Protocol State 

This field indicates the current state of IGMP on this interface. Possible 

values are Operational or Non-Operational. 

 

7.28.1.2  show ip igmp groups   

This command displays the registered multicast groups on the interface. If “detail” is specified 
this command displays the registered multicast groups on the interface in detail. 

 

Syntax 

 

show ip igmp groups <slot/ports> [detail] 

 

Default Setting 

None 

Command Mode 

Privileged Exec 

Display Message 

IP Address 

This displays the IP address of the interface participating in the multicast group. 

Subnet Mask 

This displays the subnet mask of the interface participating in the multicast 

group. 

Interface Mode 

This displays whether IGMP is enabled or disabled on this interface. 

The following fields are not displayed if the interface is not enabled: 
Querier Status 

This displays whether the interface has IGMP in Querier mode or 

Non-Querier mode. 

Groups 

This displays the list of multicast groups that are registered on this interface. 

If detail is specified, the following fields are displayed: 

Multicast IP Address 

This displays the IP Address of the registered multicast group on this 

interface. 

Last Reporter 

This displays the IP Address of the source of the last membership report 

received for the specified multicast group address on this interface. 

Up Time 

This displays the time elapsed since the entry was created for the specified 

multicast group address on this interface. 

Expiry Time 

This displays the amount of time remaining to remove this entry before it is 

aged out. 

Version1 Host Timer 

This displays the time remaining until the local router will assume that 

there are no longer any IGMP version 1 multicast members on the IP subnet attached to this 
interface. This could be an integer value or “-----” if there is no Version 1 host present. 

Version2 Host Timer 

TThis displays the time remaining until the local router will assume that 

there are no longer any IGMP version 2 multicast members on the IP subnet attached to this 
interface.This could be an integer value or “-----” if there is no Version 2 host present. 

Group Compatibilty Mode 

The group compatibility mode (v1, v2 or v3) for this group on the 

Содержание PRIMERGY BX



































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды