Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 578 / 674

Open Shortest Path First (OSPF) Commands Command Reference
Lan Switch and Router Blade
578
Default Setting
None
Command Mode
Interface Config
7.20.2.27 ip ospf authentication
This command sets the OSPF Authentication Type and Key for the specified interface.
The value of <type> is either none, simple or encrypt. If the type is encrypt a <keyid> in the
range of 0 and 255 must be specified.
Syntax
ip ospf authentication {none | {simple <key>} | {encrypt <key> <keyid>}}
no ip ospf authentication
< key > -
It is composed of standard displayable, non-control keystrokes from a Standard
101/102-key keyboard. The authentication key must be 8 bytes or less if the
authentication type is simple. If the type is encrypt, the key may be up to 256 bytes.
<keyid> -
The range is 0 to 255.
Default Setting
The default authentication type is none. The default password key is not configured.
Unauthenticated interfaces do not need an authentication. The default keyid is not
configured.
Command Mode
Interface Config
7.20.2.28 ip ospf cost
This command configures the cost on an OSPF interface.