Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 269 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
269
Selection Criteria
Source IP
- Enter the IP address of the multicast packet source to be combined with the
Group IP to fully identify a single route whose Mroute table entry you want to display or
clear. You may leave this field blank.
Group IP
- Enter the destination group IP address whose multicast route(s) you want to
display or clear.
Non-Configurable Data
Incoming Interface
- The incoming interface on which multicast packets for this
source/group arrive.
Outgoing Interface(s)
- The list of outgoing interfaces on which multicast packets for this
source/group are forwarded.
Up Time
- The time in seconds since the entry was created.
Expiry Time
- The time in seconds before this entry will age out and be removed from the
table.
RPF Neighbor
- The IP address of the Reverse Path Forwarding neighbor.
Protocol
- The multicast routing protocol which created this entry. The possibilities are:
PIM-DM
PIM-SM
DVMRP
Flags
- The value displayed in this field is valid if the multicast routing protocol running is
PIMSM. The possible values are RPT or SPT. For other protocols a "------" is displayed.
Command Buttons
Search
- Search the Mroute table for an entry matching the Source IP (if entered) and
Group IP address.
Clear Route
- Remove the data on the screen for the Source IP (if entered) and Group IP
address you have specified.
Clear All
- Remove all the data on the screen.
Refresh
- Refresh the information on the screen with the present state of the data in the
router.
6.2.6.3.4. Configuring Multicast Static Routes Configuration Page
Selection Criteria
Source
- Select Create Static Route to configure a new static entry in the MRoute table, or