Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 143 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
143
Port Role
- Each MST Bridge Port that is enabled is assigned a Port Role for each
spanning tree. The port role will be one of the following values: Root Port, Designated Port,
Alternate Port, Backup Port, Master Port, or Disabled Port.
Designated Root
- Root Bridge for the CST. It is made up using the bridge priority and the
base MAC address of the bridge.
Designated Cost
- Path Cost offered to the LAN by the Designated Port.
Designated Bridge
- Bridge Identifier of the bridge with the Designated Port. It is made up
using the bridge priority and the base MAC address of the bridge.
Designated Port
- Port Identifier on the Designated Bridge that offers the lowest cost to
the LAN. It is made up from the port priority and the interface number of the port.
Topology Change Acknowledge
- Identifies whether the next BPDU to be transmitted for
this port would have the topology change acknowledgement flag set. It is either "True" or
"False".
Edge port
- indicates whether the port is enabled as an edge port. It takes the value
"Enabled" or "Disabled".
Point-to-point MAC
- Derived value of the point-to-point status.
CST Regional Root
- Bridge Identifier of the CST Regional Root. It is made up using the
bridge priority and the base MAC address of the bridge.
CST Path Cost
- Path Cost to the CST Regional Root.
Command Buttons
Submit
- Applies the new configuration and causes the changes to take effect. These
changes will not be retained across a power cycle unless a save configuration is
performed.
Refresh
- Refreshes the screen with most recent data.
Force
- Clicking this button will force the port to send out 802.1w or 802.1s BPDUs.