Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 153 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
153
6.2.3 Routing Menu
6.2.3.1 Managing ARP Table
6.2.3.1.1. Creating ARP entries
Use this panel to add an entry to the Address Resolution Protocol table.
Configurable Data
IP
- Specifies all the existing static ARP along with an additional option "Create". When
the user selects "Create" another text boxes " IP Address" and "MAC Address" appear
where the user may enter IP address and MAC address to be configured.
IP Address
- Enter the IP address you want to add. It must be the IP address of a device
on a subnet attached to one of the switch's existing routing interfaces.
MAC Address
- The unicast MAC address of the device. Enter the address as six
two-digit hexadecimal numbers separated by colons, for example 00:06:29:32:81:40.
Command Buttons
Submit
- Update the switch with the values on this screen. If you want the switch to retain
the new values across a power cycle, you must perform a save.
6.2.3.1.2. Configuring ARP Table
You can use this panel to change the configuration parameters for the Address Resolution
Protocol Table. You can also use this screen to display the contents of the table.
Configurable Data
Age Time
- Enter the value you want the switch to use for the ARP entry ageout time. You
must enter a valid integer, which represents the number of seconds it will take for an ARP
entry to age out. The range for this field is 15 to 21600 seconds. The default value for Age
Time is 1200 seconds.