Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 617 / 674

Distance Vector Multicast Routing Protocol (DVMRP) Commands Command Reference
Lan Switch and Router Blade
617
Generation ID
This is the Generation ID value for the interface. This is used by the
neighboring routers to detect that the DVMRP table should be resent.
The following fields are displayed only if DVMRP is enabled on this interface.
Received Bad Packets
This is the number of invalid packets received.
Received Bad Routes
This is the number of invalid routes received.
Sent Routes
This is the number of routes that have been sent on this interface
.
7.27.1.3 show ip dvmrp neighbor
This command displays the neighbor information for DVMRP.
Syntax
show ip dvmrp neighbor
Default Setting
None
Command Mode
Privileged Exec
User EXEC
Display Message
IfIndex
This field displays the value of the interface used to reach the neighbor.
Nbr IP Addr
This field indicates the IP Address of the DVMRP neighbor for which this entry
contains information.
State
This field displays the state of the neighboring router. The possible value for this field
are ACTIVE or DOWN.
Up Time
This field indicates the time since this neighboring router was learned.
Expiry Time
This field indicates the time remaining for the neighbor to age out. This field is
not
applicable if the State is DOWN.
Generation ID
This is the Generation ID value for the neighbor.
Major Version
This shows the major version of DVMRP protocol of neighbor.
Minor Version
This shows the minor version of DVMRP protocol of neighbor.
Capabilities
This shows the capabilities of neighbor.
Received Routes
This shows the number of routes received from the neighbor.
Rcvd Bad Pkts
This field displays the number of invalid packets received from this neighbor.
Rcvd Bad Routes
This field displays the number of correct packets received with invalid
routes.
7.27.1.4 show ip dvmrp nexthop
This command displays the next hop information on outgoing interfaces for routing multicast
datagrams.
Syntax
show ip dvmrp nexthop