Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 162 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
162
Secondary IP Address
- Proceed to the Secondary IP Address configuration screen.
6.2.3.3 Managing OSPF
6.2.3.3.1. Configuring OSPF
Configurable Data
Router ID
- The 32 bit integer in dotted decimal format that uniquely identifies the router
within the autonomous system (AS). If you want to change the Router ID you must first
disable OSPF. After you set the new Router ID, you must re-enable OSPF to have the
change take effect. The default value is 0.0.0.0, although this is not a valid Router ID.
OSPF Admin Mode*
- Select enable or disable from the pulldown menu. If you select
enable OSPF will be activated for the switch. The default value is disable. You must
configure a Router ID before OSPF can become operational. You do this on the IP
Configuration page or by issuing the CLI command: config router id.
*NOTE: once OSPF is initialized on the router, it will remain initialized until the
router is reset.
RFC 1583 Compatibility
- Select enable or disable from the pulldown menu to specify
the preference rules that will be used when choosing among multiple AS-external-LSAs
advertising the same destination. If you select enable, the preference rules will be those
defined by RFC 1583. If you select disable, the preference rules will be those defined in
Section 16.4.1 of the OSPF-2 standard (RFC 2328), which will prevent routing loops
when AS-external-LSAs for the same destination have been originated from different