Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 601 / 674

Routing Information Protocol (RIP) Commands Command Reference
Lan Switch and Router Blade
601
Default Setting
Simple
Command Mode
Router RIP Config
7.23.2.9 distribute-list
This command is used to specify the access list to filter routes received from the source
protocol. Source protocols have OSPF, Static, and Connected.
Syntax
distribute-list <1-199> out {ospf | static | connected}
no distribute-list <1-199> out {ospf | static | connected}
<1 - 199> -
Access List ID value. The Access List filters the routes to be redistributed by
the source protocol.
no -
This command is used to cancel the access list to filter routes received from the
source protocol.
Default Setting
0
Command Mode
Router RIP Config
7.23.2.10 redistribute
This command configures RIP protocol to redistribute routes from the specified source
protocol/routers. There are five possible match options. When you submit the command
redistribute ospf match <matchtype> the match-type or types specified are added to any match
types presently being redistributed. Internal routes are redistributed by default. Source
protocols have OSPF, Static, and Connetced. Match types will have internal, external 1,
external 2, nssa-external 1, and nssa-external 2.
Syntax