Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 126 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
126
for the switch from the pulldown menu. The default is disable.
Group Membership Interval
- Specify the amount of time you want the switch to wait for
a report for a particular group on a particular interface before it deletes that interface from
the group. Enter a value between 1 and 3600 seconds. The default is 260 seconds.
Max Response Time
- Specify the amount of time you want the switch to wait after
sending a query on an interface because it did not receive a report for a particular group
on that interface. Enter a value greater or equal to 1 and less than the Group Membership
Interval in seconds. The default is 10 seconds. The configured value must be less than
the Group Membership Interval.
Multicast Router Present Expiration Time
- Specify the amount of time you want the
switch to wait to receive a query on an interface before removing it from the list of
interfaces with multicast routers attached. Enter a value between 0 and 3600 seconds.
The default is 0 seconds. A value of zero indicates an infinite timeout, i.e. no expiration.
Fast Leave Admin mode
- Select the Fast Leave mode for the a particular interface from
the pulldown menu. The default is disable.
Command Buttons
Submit
- Update the switch with the values you entered. If you want the switch to retain
the new values across a power cycle you must perform a save. You will only see this
button if you have Read/Write access privileges.
6.2.2.4.3. Viewing IGMP Snooping VLAN Status Page
Non-Configurable Data
VLAN ID
- All Vlan Ids for which the IGMP Snooping mode is Enabled.
Admin Mode
- Igmp Snooping Mode for Vlan ID.
Fast Leave Admin Mode
- Fast Leave Mode for Vlan ID.