Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 433 / 674

User Account Management Commands Command Reference
Lan Switch and Router Blade
433
7.9.2.2 username snmpv3 authentication
This command specifies the authentication protocol to be used for the specified login user. The
valid authentication protocols are
none
,
md5
or
sha
. If
md5
or
sha
are specified, the user
login password will be used as the snmpv3 authentication password. The <username> is the
login user name for which the specified authentication protocol will be used.
Syntax
username snmpv3 authentication <username> {none | md5 | sha}
no username snmpv3 authentication <username>
<username> -
is the login user name.
md5 -
md5 authentication method.
sha -
sha authentication method.
none -
no use authentication method.
no -
This command sets the authentication protocol to be used for the specified login user
to
none
. The <username> is the login user name for which the specified authentication
protocol will be used.
Default Setting
No authentication
Command Mode
Global Config
7.9.2.3 username snmpv3 encryption
This command specifies the encryption protocol and key to be used for the specified login user.
The valid encryption protocols are
none
or
des
. The
des
protocol requires a
key
, which can be
specified on the command line. The
key
may be up to 16 characters. If the
des
protocol is
specified but a key is not provided, the user will be prompted to enter the key. If
none
is
specified, a key must not be provided. The <username> is the login user name for which the
specified encryption protocol will be used.