manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY BX, Описание

Поделиться
Скачать
Page 386
Fujitsu Siemens Computers PRIMERGY BX Скачать руководство пользователя страница 386

Management Commands                                           Command Reference   

Lan Switch and Router Blade

 

386 

<name> - 

community name (up to 16 case-sensitive characters). 

no -

 This command removes this community name from the table. The name is the 

community name to be deleted.

 

 

Default Setting 

Two default community names: public and private. You can replace these default community 
names with unique identifiers for each community. The default values for the remaining four 
community names are blank. 

 

Command Mode

 

Global Config 

 

 

 

 

This command activates an SNMP community. If a community is enabled, an SNMP manager 
associated with this community manages the switch according to its access right. If the 
community is disabled, no SNMP requests using this community are accepted. In this case the 
SNMP manager associated with this community cannot manage the switch until the Status is 
changed back to Enable. 

 

Syntax 

 

snmp-server community mode <name> 

no snmp-server community mode <name> 

 

<name> - 

community name. 

no -

 This command deactivates an SNMP community. If the community is disabled, no 

SNMP requests using this community are accepted. In this case the SNMP manager 
associated with this community cannot manage the switch until the Status is changed back 
to Enable.

 

 

Default Setting 

The default public and private

 

communities are enabled by default. The four undefined 

communities are disabled by default. 

 

Command Mode

 

Global Config 

 

 

 

Содержание PRIMERGY BX



































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды