Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 346 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
346
7.4.5.2.11. set igmp maxresponse
This command sets the IGMP Maximum Response time on a particular VLAN. The Maximum
Response time is the amount of time in seconds that a switch will wait after sending a query on
an interface, which is participating in the VLAN, because it did not receive a report for a
particular group in that interface. This value must be less than the IGMP Query Interval time
value.
Syntax
set igmp maxresponse <1-3965> <1-3599>
no set igmp maxresponse <1-3965>
<1-3965> -
VLAN ID (Range: 1 – 3965).
no -
This command sets the IGMP maximum response time on a particular VLAN to the
default value.
Default Setting
10
Command Mode
Vlan Database
7.4.5.2.12. set igmp mcrtexpiretime
This command sets the Multicast Router Present Expiration time on a particular VLAN. This is
the amount of time in seconds that a switch will wait for a query to be received on an interface,
which is participating in the VLAN, before the interface is removed from the list of interfaces
with multicast routers attached. The range is 0 to 3600 seconds. A value of 0 indicates an
infinite time-out, i.e. no expiration.
Syntax
set igmp mcrtexpiretime <1-3965> <0-3600>
no set igmp mcrtexpiretime <1-3965>
<1-3965> -
VLAN ID (Range: 1 – 3965).