manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY BX, Описание

Поделиться
Скачать
Page 521
Fujitsu Siemens Computers PRIMERGY BX Скачать руководство пользователя страница 521

Differentiated Service Command                                           Command Reference   

Lan Switch and Router Blade

 

521 

 

7.15.5.6  show policy-map interface 

 

This command displays policy-oriented statistics information for the specified interface and 
direction.  
 

Syntax 

 

show policy-map interface <slot/port> in   

 
<

slot/port>

 specifies a valid slot number and port number for the system. The direction 

parameter indicates the interface direction of interest.

 

Command Mode 

 Privileged EXEC  

Display Message 

Interface 

The slot number and port number of the interface (slot/port). 

 

Direction 

The traffic direction of this interface service, either in or out. 

Operational Status 

The current operational status of this DiffServ service interface. 

 

Policy Name 

The name of the policy attached to the interface in the indicated 

direction. 
 

Interface Offered Octets/Packets 

A cumulative count of the octets/packets offered to this 

service interface in the specified direction before the defined DiffServ treatment is applied. 
 

Interface Discarded Octets/Packets 

A cumulative count of the octets/packets discarded by 

this service interface in the specified direction for any reason due to DiffServ treatment. 
 

Interface Sent Octets/Packets 

A cumulative count of the octets/packets forwarded by this 

service interface in the specified direction after the defined DiffServ treatment was applied. In 
this case, forwarding means the traffic stream was passed to the next functional element in the 
data path, such as the switching or routing function or an outbound link transmission element. 
 

The following information is repeated for each class instance within this policy: 
 
Class Name 

The name of this class instance. 

 

In Offered Octets/Packets 

A count of the octets/packets offered to this class instance before 

the defined DiffServ treatment is applied. Only displayed for the 'in' direction. 
 

In Discarded Octets/Packets 

A count of the octets/packets discarded for this class instance 

for any reason due to DiffServ treatment of the traffic class. Only displayed for the 'in' direction. 
 

Tail Dropped Octets/Packets 

A count of the octets/packets discarded due to tail dropping 

from a transmission queue, typically due to the effects of traffic shaping. These counts may not 
be supported on all platforms. Only displayed for the 'out' direction. 
 

Random Dropped Octets/Packets 

A count of the octets/packets discarded due to WRED 

Содержание PRIMERGY BX



































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды