manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY BX, Описание

Поделиться
Скачать
Page 317
Fujitsu Siemens Computers PRIMERGY BX Скачать руководство пользователя страница 317

Device Configuration Commands                                                                                      Command Reference   

Lan Switch and Router Blade

 

317 

7.4.3.9 protocol 

group 

This command attaches a <vlanid> to the protocol-based VLAN identified by <group-name>. A 
group may only be associated with one VLAN at a time, however the VLAN association can be 
changed. 

 

Syntax 

 

protocol group <group-name> <vlanid> 

no protocol group <group-name> <vlanid> 

 
<vlanid> -

 VLAN ID (Range: 1 –3965). 

<group-name> -

 a VLAN Group Name (a character string of 1 to 16 characters). 

no -

 This command removes the <vlanid> from this protocol-based VLAN group that is 

identified by this <group-name>. 

Default Setting 

None 

Command Mode

 

VLAN database 

 

 

7.4.3.10 switchport 

acceptable-frame-type  

This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged 
frames or priority frames received on this interface are discarded. For Admit All mode, 
untagged frames or priority frames received on this interface are accepted and assigned the 
value of the interface VLAN ID for this port. With either option, VLAN tagged frames are 
forwarded in accordance with the IEEE 802.1Q VLAN Specification. 

 

Syntax 

 

switchport acceptable-frame-type {tagged | all} 

no switchport acceptable-frame-type {tagged | all} 

 
tagged -

 VLAN only mode. 

all -

 Admit all mode. 

no -

 This command sets the frame acceptance mode per interface to 

Admit All

. For Admit 

All mode, untagged frames or priority frames received on this interface are accepted and 
assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged 
frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification. 

 

Default Setting 

Admit all 

Содержание PRIMERGY BX



































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды